"Steel mug" is not one product, so it is not one industry. The phrase covers a pressed single-wall mug with a welded handle, an enamelled camping mug, a double-wall travel mug with a lid, and a lidded insulated tumbler. Only the last two hold temperature, and they come from vacuum drinkware plants rather than utensil pressing shops. A quotation that does not name the construction is not comparable to any other quotation. HYV makes no mug at all: no handled mug, no ceramic, no camping shell. It makes the insulated tumbler format, including the 600ml ChillSip and DailySip at ₹1,199. If a mug with a handle is the requirement, HYV is not the supplier to ask.
Key Facts
- The phrase "steel mug" is used for at least four different products built by three separate industries.
- A vacuum gap between two steel walls is the only feature that makes a steel vessel hold temperature.
- HYV makes no handled mug and no ceramic; the 600ml ChillSip and DailySip are insulated tumblers at ₹1,199.
- The DailySip's own Shopify title reads "Slim Desk & Travel Mug", which is why mug searches reach it.
- A 600ml HYV tumbler holds cold drinks 8 hours and hot 6; a 1.2L HYV tumbler holds cold 12 and hot 8.
If you only want the pick: HydroMax at ₹1,699. Full reasoning below.
Four products share the phrase
Send that enquiry out and four different kinds of factory will answer it, because the words describe a shape rather than a construction.
The pressed single-wall mug. This belongs to the steel utensil trade: a drawn body, a polished finish, a handle riveted or spot-welded to the side. Unbreakable, inexpensive, and thermally about the same as an open cup.
The enamelled camping mug. A steel shell with a vitreous coating fired onto it. A coating industry makes these, and they are bought for appearance and campfire tolerance, not retention.
The double-wall travel mug. Two steel skins with the air pumped out of the cavity between them, a lid that closes, and a profile narrow enough for a car. Different plant, different tooling, different price band.
The lidded insulated tumbler. The same vacuum construction, usually with a wider opening and often no side handle.
Four products, one search phrase. Deciding which of the four you want is the first line of the brief, not a detail to settle later.
The question that sorts them in five words
Ask: is there a vacuum gap? Everything else follows from the answer.
A single wall conducts. Steel moves heat readily, so the outside of a single-wall mug arrives at drink temperature within a minute or two and then sheds it into the room. No finish, grade or wall thickness changes that in a way you would notice across a working morning.
Two walls with the air evacuated remove the conduction path instead of slowing it. Heat has to cross a near-vacuum, which it does badly, and that is the whole mechanism. The brushed exterior, the powder coat and the gift carton all sit outside this question.
So a single-wall mug and an insulated one are not two grades of one product. They do different jobs, they are made on different lines, and comparing their unit prices tells you nothing useful.
Why the quotes you get back will not line up
Buyers often collect three quotes for "steel mugs" and find they vary by several multiples. Usually nothing is wrong with any of them.
A utensil shop is quoting a pressing and a polish. An insulated drinkware plant is quoting two formed bodies, a vacuum-sealing step with a getter, a leak test and a thermal test, plus a lid that is its own moulded assembly. The second one has more operations in it, so it costs more and takes longer.
Minimum quantities diverge the same way. Across insulated drinkware, 1,000 to 5,000 units per SKU is a common floor, because the vacuum and test stages reward batching. HYV's own minimum is 25 units per SKU, which is the exception rather than the industry norm, and custom colourways start at 1,000.
What HYV makes, and what it does not
HYV makes no mug. There is no handled mug in the range at any capacity, no ceramic and no camping shell, and inventing one here would be the fastest way to waste your enquiry.
What exists is the insulated tumbler format. The 600ml ChillSip and the 600ml DailySip are both ₹1,199. The DailySip's own product title calls it a "Slim Desk & Travel Mug", which is precisely why mug searches land on it. Above that sits a 1.2L family; the wide-body HydroMax is ₹1,699.
Retention is published per format rather than as one headline number. A 600ml tumbler holds cold 8 hours and hot 6. A 1.2L tumbler holds cold 12 and hot 8. The sealed bottles, a separate product with a closing cap, hold cold 24 and hot 12. Both walls are food-grade 304 stainless steel, with no inner coating or lining.
Disclosure
HYV sells the tumblers and bottles named above, so read the category explanation as useful and the product mentions as interested. Something you can check without taking HYV's word for it: run a single-wall steel mug and any vacuum-insulated vessel under the same hot tap for half a minute, and only one of them becomes too hot to hold. Something HYV is not the answer for: a handled steel desk mug, which it does not make. IS 17526:2021 is the Indian standard for vacuum-insulated vessels, and a licence under it is granted per model rather than per brand, so ask for the scope on the exact model you are quoting. HYV makes BIS-certified insulated steel bottles.
Related reading: oem water bottle manufacturer what oem actually means, stainless steel coffee mug the everyday case for one and vacuum flask manufacturers in india how to source.
Frequently Asked Questions
Does HYV manufacture steel mugs?
No. There is no handled mug, no ceramic and no camping mug in the range. The nearest real product is the insulated tumbler format, which includes the 600ml ChillSip and DailySip.
How do I tell a single-wall mug from an insulated one in a photo?
You often cannot, which is why the construction has to be written into the enquiry. The giveaways are a visible rolled rim with no gap, and a retention figure that the supplier will not state in hours.
Why is an insulated mug so much more expensive than a plain steel one?
It has more operations. Two formed bodies, a vacuum-sealing stage, a leak test, a thermal test and a separately moulded lid assembly, against one pressing and a polish.
What minimum order should I expect from an Indian insulated drinkware maker?
Commonly 1,000 to 5,000 units per SKU, because the vacuum and test stages reward batching. HYV's minimum is 25 units per SKU, and a custom colourway starts at 1,000.
Which capacity is the closest thing to a travel mug that HYV makes?
The 600ml tumbler format. It holds cold drinks 8 hours and hot 6, and the DailySip's own title describes it as a slim desk and travel mug.
Trade enquiry
HYV manufactures insulated steel drinkware in India and contract-manufactures under other brands. Send a brief and get a quote against a real specification.
Send a manufacturing brief →Minimum 25 units per SKU · custom colourway from 1,000 · 7–14 days from a confirmed brief · UV print or laser etching
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.